cad, cam file commit

adding modified CAD and CAM file sets. Checked against DRC issues, all
looks okay, ready to manufacturing!

pcb/lf-antenna/CAM/lf-antenna.TXT

@@ -0,0 +1,24 @@
+%
+M48
+M72
+T01C0.0394
+T02C0.1299
+%
+T01
+X42938Y20014
+X42938Y21196
+X42855Y18105
+X27105Y20605
+X26355Y20605
+X42855Y23105
+T02
+X20605Y20605
+X17605Y20605
+X20605Y23605
+X20605Y17605
+X23605Y20605
+X18484Y18484
+X22726Y18484
+X22726Y22726
+X18484Y22726
+M30

pcb/lf-antenna/CAM/lf-antenna.dri

@@ -0,0 +1,37 @@
+Generated by EAGLE CAM Processor 6.4.0
+
+Drill Station Info File: lf-antenna.dri
+
+ Date              : 2015.11.13. 17:00:29
+ Drills            : generated
+ Device            : Excellon drill station
+
+Parameter settings:
+
+ Tolerance Drill + :  0.00 %
+ Tolerance Drill - :  0.00 %
+ Rotate            : no
+ Mirror            : no
+ Optimize          : no
+ Auto fit          : yes
+ OffsetX           : 0inch
+ OffsetY           : 0inch
+ Layers            : Drills Holes
+
+Drill File Info:
+
+ Data Mode         : Absolute
+ Units             : 1/10000 Inch
+
+Drills used:
+
+ Code  Size       used
+
+ T01   0.0394inch     6
+ T02   0.1299inch     9
+
+Total number of drills: 15
+
+Plotfiles:
+
+ lf-antenna.TXT

pcb/lf-antenna/CAM/lf-antenna.gpi

@@ -0,0 +1,44 @@
+Generated by EAGLE CAM Processor 6.4.0
+
+Photoplotter Info File: lf-antenna.gpi
+
+ Date              : 2015.11.13. 17:00:29
+ Plotfile          : lf-antenna.GTL
+ Apertures         : generated: 
+ Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
+
+Parameter settings:
+
+ Emulate Apertures : no
+ Tolerance Draw  + :  0.00 %
+ Tolerance Draw  - :  0.00 %
+ Tolerance Flash + :  0.00 %
+ Tolerance Flash - :  0.00 %
+ Rotate            : no
+ Mirror            : no
+ Optimize          : yes
+ Auto fit          : yes
+ OffsetX           : 0inch
+ OffsetY           : 0inch
+
+Plotfile Info:
+
+ Coordinate Format : 2.4
+ Coordinate Units  : Inch
+ Data Mode         : Absolute
+ Zero Suppression  : None
+ End Of Block      : *
+
+Apertures used:
+
+ Code     Shape     Size                  used
+
+ D10      draw      0.0010inch               6
+ D11      draw      0.0000inch              11
+ D12      rectangle 0.1496inch x 0.0906inch     2
+ D13      rectangle 0.0984inch x 0.0217inch     4
+ D14      rectangle 0.0394inch x 0.0433inch    12
+ D15      draw      0.0150inch             458
+ D16      round     0.0700inch               2
+ D17      round     0.0591inch               2
+

pcb/lf-antenna/README.md

@@ -0,0 +1 @@
+LF antenna CAD / CAM / MFG files. Put here as it was in the original zip file too. Didn't modified the layout file, only CAM generation.

pcb/proxmark3_original_cad_cam_zip_files/README.md

@@ -0,0 +1,5 @@
+These files are downloaded from here: http://cq.cx/proxmark3.pl
+
+These are the original, non-modified parts. 
+
+What I've noticed that there are problems with the stop mask layers (via and component silkscreen print) This is what I'm going to modify in my cad / cam version.