67 lines
2.0 KiB
Plaintext
67 lines
2.0 KiB
Plaintext
#
|
|
# /etc/siproxd.conf - siproxd configuration file
|
|
#
|
|
# !! This is a sample file, adapt it to your needs before using it
|
|
#
|
|
|
|
######################################################################
|
|
# DBCLASS_BABBLE 0x00000001 // babble (like entering/leaving fnc)
|
|
# DBCLASS_NET 0x00000002 // network
|
|
# DBCLASS_SIP 0x00000004 // SIP manipulations
|
|
# DBCLASS_REG 0x00000008 // Client registration
|
|
# DBCLASS_NOSPEC 0x00000010 // non specified class
|
|
# DBCLASS_PROXY 0x00000020 // proxy
|
|
# DBCLASS_DNS 0x00000040 // DNS stuff
|
|
# DBCLASS_NETTRAF 0x00000080 // network traffic
|
|
# DBCLASS_CONFIG 0x00000100 // configuration
|
|
# DBCLASS_RTP 0x00000200 // RTP proxy
|
|
#
|
|
debug_level = 0x000002fe
|
|
|
|
######################################################################
|
|
# The IP addresses of the INBOUND and OUTBOUND interface can
|
|
# be specified as hostnames or in dotted decimal form:
|
|
#
|
|
# host_inbound=foo.bar.org
|
|
#
|
|
# or as dotted decimal IP:
|
|
#
|
|
# host_inbound=10.0.0.1
|
|
#
|
|
host_inbound = 192.168.1.1
|
|
host_outbound = ries.homeip.net
|
|
|
|
|
|
######################################################################
|
|
# Port to listen for incomming SIP messages.
|
|
# 5060 is usually the correct choise - don't change is unless you
|
|
# know what you're doing
|
|
#
|
|
sip_listen_port = 5060
|
|
|
|
|
|
######################################################################
|
|
# Shall we daemonize?
|
|
#
|
|
daemonize = 0
|
|
|
|
######################################################################
|
|
# global switch to enable (1) or disable (0) the RTP proxy feature
|
|
#
|
|
rtp_proxy_enable = 1
|
|
|
|
######################################################################
|
|
# Port range where to allocate listen ports for incomming RTP traffic
|
|
# this should be a range that is not blocked by the firewall
|
|
#
|
|
rtp_port_low = 7070
|
|
rtp_port_high = 7080
|
|
|
|
######################################################################
|
|
# Timeout for RTP streams
|
|
# after this number of seconds, at RTP stream is considered dead
|
|
# and proxying it will be stopped.
|
|
#
|
|
rtp_timeout = 60
|
|
|